- 2018 Anime Central Open Shoot
- Nikon D500 Hands-On and Opinion
- Sony DSC-HX80 Hands-On and Opinion
- Nikon Red D3400 Hands-On and Opinion
- Sony A9 Hands-On and Opinion
- c2e2 2018 Saturday Photos!
- I’ve been really working on my Youtube channel lately!
- SD Card Speed Test Roundup October 2017
- Yongnuo 100mm f2 Lens Details
- It’s been a while! (Cosplay Photos)
Tag Archives: diy
I put together a portable flash setup for a convention coming up. My plans here are to potentially use this as a secondary light source in more detailed photo sessions (assuming I have any). The nice thing about it is the portability and I’m also able to get around a few limitations of the gear being used. All of the items are things I’ve acquired in the past, so there … Continue reading
I received a set of Yongnuo RF-603N radio frequency triggers today. They are low cost, yet decent quality flash and camera triggers available online. While I like them for their small size and general reliability, not all is perfect. There was an odd design omission related to the shoe connection that is generally used when connecting one of the transceivers to a camera. Here is a quick modification to help … Continue reading
I was recently given the task to digitize transparent slides from the 1960s. The color transparency slides posed an interesting problem. Conventional scanning was difficult because the slides are small and are designed to be back-lit by a projector. There are dedicated devices available that can scan film negatives, but they are expensive and difficult to find. The standard scanner that I had wasn’t sufficient for the task because it … Continue reading
The rear dial on my K-7 has been having issues for quite a while. Scrolling left especially didn’t work properly. The aperture would jump around randomly and even cause the camera to temporarily lock up. After my successful modification of the K-01, I was feeling confident enough to take the K-7 apart to see if I could do something about it. In the past I tried the old trick of … Continue reading
As you might know, I frequently use two cameras at the same time. I usually do this at conventions and situations where I need a decent range of focal lengths with the prime lenses I use. It adds extra cost, but it’s the way I prefer to do things. My K-7 is having some issues with the rear dial and potentially some other issues, so I went about remedying that … Continue reading